CMs Series
FOR URBAN, METRO AND UNDERGROUND RAILWAYS
COMPATIBLE WITH NEARLY EVERY
STRUCTURE CLEARANCE GAUGE
MODULAR CONCEPT
SERIES
CMS
- Restore Transverse Rail Profile
- Remove Corrugations
- Remove Rail RCF Defects
- Reduce Noise
- Increase Rails Service life
- reduce rail life cycle costs
- corrective and preventive milling of rails
- suitable for both track and turnouts
- single pass operation
- high performance and precision
- modular configuration (2 or 3 car consists)
- ultra clean emissions
- suitable for high speed, main line, metro and underground railways
- long tool life
- no dismantling of track obstacles required
| TYPE | CMS-3 | CMS-4 |
|---|---|---|
| LENGHT | 23.000 mm | 31.000 mm |
| WIDTH | 2.350 mm | 2.350 mm |
| HEIGHT | 2.850 mm | 2.850 mm |
| WEIGHT | 70 t | 90 t |
| AXLE LOADS | ~12 t | ~12 t |
| TRAVEL SPEED | Up to 60 km/h | Up to 60 km/h |
| MIN CURVE RADIUS | 30 m | 30 m |
| MILLING UNITS | 2 milling wheels (1 per rail) | 4 milling wheels (2 per rail) |
| Finishing Units | 1 | 2 |
| POWER SOURCE | Diesel EU Stage V | Diesel EU Stage V |
| OPTIONAL POWER SOURCE | Battery Power | Battery Power |
| MILLING SPEED | 600 – 1200 m/h | 600 – 1200 m/h |
| METAL REMOVAL | 0.1 – 6.0 mm | 0.1 – 6.0 mm |
INCREASE RAIL SERVICE LIFE WITH OUR CMS SERIES
MOBILE RAIL MILLING TRAINS
Achieving optimum wheel rail contact
SBI high output rail milling technology
Achieving optimum rail roughness levels
pre-milling
post-milling
For info, please contact
info@schweerbau-international.com